Star Brite Marine Descaling Fluid (Ready-to-use)

Article
STA84032
€24.95 €20.62
 
Add to Wish List
  • NL/BE: Free shipping of postal packages from €150,-
  • Fast delivery from our own warehouse!
  • Largest online offer
Description

Star Brite Marine Descaling Fluid (Ready-to-use)

Star Brite Marine Descaling Fluid safely and quickly removes limescale, calcium, corrosion, salt, and carbon deposits from raw water cooling systems. Such deposits can cause overheating or inefficiency in air conditioning systems by impeding water flow in cooling channels and heat exchangers. Furthermore, limescale and loose debris can cause damage to pumps. The fluid does not affect gaskets, impellers, hoses, or seals and can be recirculated via a pump or used as a dip bath. Recirculation requires minimal disassembly and reduces downtime.

Note: the product may discolor some metals, chrome plating, or stainless steel. Ensure you have sufficient knowledge of the system before use.

Specifications

  • Eliminate scale and mineral deposits with ease, ensuring your marine engine operates at peak efficiency
  • No mixing or measuring required; just pour and go for hassle-free descaling
  • Protect seals, gaskets, and rubber impellers while thoroughly cleaning your engine
  • Ideal for outboard motors, inboard engines, sterndrives, and personal watercraft
  • Regular use helps prevent costly repairs and extends the life of your engine
  • Achieve high-quality descaling results like professional marine technicians
  • Keep your engine running smoothly and avoid expensive breakdowns with regular use
  • Simplifies engine care, allowing more time for enjoying your time on the water

Instructions
Product is gebruiksklaar en hoeft niet verder te worden verdund.

  1. Isolate and empty the system to be descaled, and ensure that no raw water can enter the system during the process. Turn off the compressor or cooler to prevent it from running during descaling. Then rinse the system thoroughly with clean water to remove any remaining seawater.
  2. Fill the system with the required amount* of ready-to-use descaling fluid. Set up a recirculation system with a suitable pump, where both the inlet and outlet are connected to a bucket or collection reservoir. If you cannot use a pump, let the fluid soak in the system for 4 to 8 hours. Do not completely seal the system, as gas formation may occur during the process. This overpressure can cause damage.
  3. After descaling, allow the fluid to drain completely from the system and dispose of it in accordance with local, regional, or national environmental regulations.
  4. Rinse the system thoroughly with clean water to remove all residue of the descaling fluid and reassemble the system. It is recommended to replace all sacrificial anodes at this time. Immersion of parts: Parts can also be fully submerged in the fluid for 4 to 8 hours or until the limescale is completely dissolved. Then rinse thoroughly with clean water.

*The required quantity depends on the system volume.


Specifications
Brand
Star Brite
Productreviews
There are no reviews for this product yet. Product reviews are collected based on real purchases and can therefore only be submitted after a purchase. View all service reviews of MarineSpareParts.com here.