Star Brite Engine Descaler

Article
As low as €29.95 €24.75
 
Add to Wish List
  • NL/BE: Free shipping of postal packages from €150,-
  • In Stock? Shipped today!
  • Largest online offer
Description

Star Brite Engine Descaler

Order number
STA92632 - 1L
STA92600 - 3.78L

Information

  • Removes limescale in all direct cooled inboard engines (wet exhaust)
  • The engine runs at an optimum operating temperature for more efficient performance
  • Does not attack rubber gaskets, seals, pumps, etc

Instructions
Before use, remove the water filter and, if possible, also the thermostat. Close the tap of the water inlet (weed tank) and start the engine so that the existing cooling water can flush away through the wet exhaust. Switch off the engine and let the product run into the weed container. Mixing ratio: 1 liter of engine descaler to 2 liters of clean water. Now start the engine so that the greenish liquid is sucked into the system. As soon as it leaves the ship through the wet exhaust, switch off the engine and let it work for 15-30 minutes. Now start the engine to allow any contamination to be flushed away. Try to catch as much loosened deposits as possible. The wet exhaust can therefore become somewhat dirty as a result of, for example, limescale. Open the water inlet valve and let the engine idle for a while to flush the system thoroughly. Always replace the water filter after treatment. To prevent engine wear, annual descaling of the cooling system is recommended.


Specifications
Brand
Star Brite